# $Id$

PortSystem      1.0

name				qmail-spamcontrol
version				2.4.18
revision			5
categories			mail
maintainers			yahoo.com:compconsultant
platforms			darwin

description			Qmail, enhanced Spamcontrol version

long_description	        Robust, popular mail system.

extract.mkdir			yes

universal_variant		no

variant relaymailfrom {}
variant noreqbrackets {}
variant noverp {}
variant moreipme {}
variant bigtodo {}

homepage			http://www.fehcom.de/qmail/spamcontrol.html

master_sites		        http://www.fehcom.de/qmail/spamcontrol/:spamcontrol \
				http://cr.yp.to/software/:qmail \
				http://qmail.site2nd.org/:qmail \
				http://qmail-mirror.jms1.net/:qmail \
				http://www.qmail.org/:qmail \

distfiles			qmail-1.03.tar.gz:qmail \
				spamcontrol-2418_tgz.bin:spamcontrol \

checksums			qmail-1.03.tar.gz \
					md5 622f65f982e380dbe86e6574f3abcb7c \
					sha1 18fb960481291a0503e93a94df3f6094edb7f27a \
					rmd160 b851f273f1d365d38efd949b1efcf35768ffa30f \
				spamcontrol-2418_tgz.bin \
					md5 a5502cd69e573a2753e532bce8fb6c3a \
					sha1 b2329b412a88ca2072cfb5e430efd1dd8a410b64 \
					rmd160 4306ff09148332f5ad4cb1a3ff3b5da74b888d79 \

worksrcdir		qmail-1.03

patchfiles		patch-dns.c.diff \
			patch-strerr_sys.c.diff

configure.cflags 	-O2 -include /usr/include/errno.h -c
build.target		setup-patch
destroot.cmd		./install-destroot

post-extract {

	# Merge Spamcontrol source with Qmail source
	foreach file [glob ${worksrcpath}/qmail-1.03/*] {
		file rename ${file} ${worksrcpath}/
	}
	file delete ${worksrcpath}/qmail-1.03

	# Create an install file to install into destroot since
	# destroot is not supported by qmail
	file copy ${worksrcpath}/conf-qmail ${worksrcpath}/conf-destroot
        reinplace "s|/var/qmail|${destroot}${prefix}/var/qmail|g" \
		${worksrcpath}/conf-destroot
	file copy ${worksrcpath}/install.c ${worksrcpath}/install-destroot.c

	# Change live install dir to reflect the prefix
        reinplace "s|/var/qmail|${prefix}/var/qmail|g" \
		${worksrcpath}/conf-qmail
}

post-patch {
		# Apply Spamcontrol patches
		foreach file [glob ${worksrcpath}/*.patch] {
			system "patch -p2 <${file}"
		}

		# Append our commands for making a destroot installer
		# This is because Spamcontrol and us needs to patch Makefile
		system "cat ${filespath}/append-Makefile >>${worksrcpath}/Makefile"

		# Handle the variants, disable via source code define change
		foreach file [glob ${worksrcpath}/*c] {
			if {![variant_isset relaymailfrom]} {
         			reinplace "s|^#define RELAYMAILFROM|\/* #define RELAYMAILFROM *\/|g" \
					${file}
			}
			if {[variant_isset noreqbrackets]} {
         			reinplace "s|^#define REQBRACKETS|\/* #define REQBRACKETS *\/|g" \
					${file}
			}
			if {[variant_isset noverp]} {
         			reinplace "s|^#define VERP|\/* #define VERP *\/|g" \
					${file}
			}
			if {![variant_isset moreipme]} {
         			reinplace "s|^#define MOREIPME|\/* #define MOREIPME *\/|g" \
					${file}
			}
			if {![variant_isset bigtodo]} {
         			reinplace "s|^#define BIGTODO|\/* #define BIGTODO *\/|g" \
					${file}
			}
		}
}

configure {

	# The qmail users and groups are required before compilation
	addgroup qmail gid=2107
	addgroup nofiles gid=2108
	adduser alias uid=7790 gid=[existsgroup nofiles] realname=Qmail-alias-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmaild uid=7791 gid=[existsgroup nofiles] realname=Qmail-SMTP-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmaill uid=7792 gid=[existsgroup nofiles] realname=Qmail-log-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmailp uid=7793 gid=[existsgroup nofiles] realname=Qmail-password-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmailq uid=7794 gid=[existsgroup qmail] realname=Qmail-queue-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmailr uid=7795 gid=[existsgroup qmail] realname=Qmail-remote-user home=${prefix}/var/qmail shell=/usr/bin/true
	adduser qmails uid=7796 gid=[existsgroup qmail] realname=Qmail-send-user home=${prefix}/var/qmail shell=/usr/bin/true
}

pre-destroot {
	# A whole lot of keepdirs, Qmail creates lots of required, empty directories
	destroot.keepdirs \
		${destroot}${prefix}/var/log/qmail/smtpd \
		${destroot}${prefix}/var/qmail/control \
		${destroot}${prefix}/var/qmail/users \
		${destroot}${prefix}/var/qmail/queue/pid \
		${destroot}${prefix}/var/qmail/queue/bounce
	if {![variant_isset bigtodo]} {
		destroot.keepdirs-append \
			${destroot}${prefix}/var/qmail/queue/todo \
			${destroot}${prefix}/var/qmail/queue/intd
	}
	
	for {set i 0} {$i <= 22} {incr i} {
		destroot.keepdirs-append \
			${destroot}${prefix}/var/qmail/queue/info/${i} \
			${destroot}${prefix}/var/qmail/queue/remote/${i} \
			${destroot}${prefix}/var/qmail/queue/local/${i} \
			${destroot}${prefix}/var/qmail/queue/mess/${i}
		if {[variant_isset bigtodo]} {
			destroot.keepdirs-append \
				${destroot}${prefix}/var/qmail/queue/todo/${i} \
				${destroot}${prefix}/var/qmail/queue/intd/${i}
		}
	}
}

post-destroot {
	# Minimal requirements per Qmail install doc
	touch ${destroot}${prefix}/var/qmail/alias/.qmail-postmaster
	touch ${destroot}${prefix}/var/qmail/alias/.qmail-mailer-daemon
	touch ${destroot}${prefix}/var/qmail/alias/.qmail-root

	# Create the log directories
	xinstall -d -o qmaill ${destroot}${prefix}/var/log/qmail/smtpd

	# Copy example files
	xinstall -d ${destroot}${prefix}/var/qmail/samples
	xinstall -m 644 -W ${filespath} README.txt ${destroot}${prefix}/var/qmail/samples
	foreach file {run qmailctl qmail-send-run qmail-send-log-run qmail-smtpd-run qmail-smtpd-log-run} {
		xinstall -W ${filespath} ${file}.in ${destroot}${prefix}/var/qmail/samples/${file}
		reinplace "s%@PREFIX@%${prefix}%g" ${destroot}${prefix}/var/qmail/samples/${file}
	}
	
	# Additional Spamcontrol files
	xinstall -d ${destroot}${prefix}/var/qmail/scripts
	xinstall -W ${worksrcpath} \
		qmail-alias2recipients \
		qmail-users2recipients \
		qmail-pwd2recipients \
		qmail-vpopmail2recipients \
		${destroot}${prefix}/var/qmail/scripts
	xinstall -m 644 -W ${worksrcpath} \
		conf-spamcontrol \
		ucspi-ssl-0.70_ucspitls-0.4.patch_ \
		clamav-0.90.1_output.patch_ \
		Makefile.djbdns \
		badmailfrom \
		badmimetypes \
		badloadertypes \
		badrcptto \
		tarpitcount \
		README_spamcontrol.html \
		README.wildmat \
		README.moreipme \
		README.bigtodo \
		README.qmailqueue \
		README.bouncemaxbytes \
		README.doublebouncetrim \
		README.recipients \
		README.djbdns \
		INSTALL.spamcontrol \
		HISTORY.spamcontrol \
		FILES.spamcontrol \
		LICENSE.spamcontrol \
		TODO.spamcontrol \
		RELEASE_22.spamcontrol \
		RELEASE_23.spamcontrol \
		RELEASE_24.spamcontrol \
		LOGGING.spamcontrol \
		SMTPREPLY.spamcontrol \
		README.mav \
		PROPOSAL.mav \
		README.clamav \
		${destroot}${prefix}/var/qmail/doc
	xinstall -W ${worksrcpath} \
		install_spamcontrol.sh \
		${destroot}${prefix}/var/qmail/doc

	# User must run this
	xinstall -W ${worksrcpath} config-fast ${destroot}${prefix}/var/qmail/scripts/config-fast

	# Per Qmail install doc
	xinstall ${destroot}${prefix}/var/qmail/boot/home ${destroot}${prefix}/var/qmail/rc
}

post-install {
ui_msg "\n
To control qmail, the daemontools and ucspi-tcp ports are highly recommended.
A good reference for setting up qmail is http://www.lifewithqmail.org/ .
This port includes some sample files based on the Life with Qmail web site.
They can be found in ${prefix}/var/qmail/samples .
Also look at http://www.fehcom.de/qmail/spamcontrol.html for further info.
The fehcom site has docs for all the stuff added to the base qmail software.
There are numerous configuration options to qmail. Please read all the docs!
******************************
For now, you must run ${prefix}/var/qmail/scripts/config-fast your.domain.name
to set up some files for your mail server. your.domain.name should point
to this machine you are installing qmail on.
******************************
\n"
}

post-activate {

	# Remove the turd files
	system "cd ${prefix}/var/qmail; find . -name .turd_${name} -delete"
	system "rm ${destroot}${prefix}/var/log/qmail/smtpd/.turd_${name}"
}

platform darwin 6 {
	pre-fetch {
		error "${name} requires Mac OS X 10.3 or newer."
	}
}

livecheck.check			regex
livecheck.regex			{Version\s+([0-9.]+)<}